chornung

Even though I have added the "reference to duplicate person" line for Duplicate people in Box contents, and have Reference to duplicate person at bottom set to (Duplicate), the line still doesn't show up for two people who appear in two different places on the chart (first cousins married each other - explains a LOT in the family...). I even added an element (Lifespan) that I'm not using anywhere else in the chart to Duplicate People and it does not show up in either place they appear, so it appears VCF (TMG?) is not recognizing them as "duplicate people" here, even though the ID number is the same in both places. Is it perhaps because in the first spot they appear, the female is listed in the top box and male in the indented spouse box, and later in the chart, the male is primary and female listed as spouse? (I think I may have just answered my own question here...) Or, is there some other setting/tag that needs to be enabled for the Duplicate line to appear in one of the two places they are referenced in the chart?

Thanks for the suggestions. Will experiment with min box height option. On the other hand, the more I think about it, if someone is looking THAT closely at the chart, maybe they will find some other missing data to provide. Dare to dream!!

Because I saw lhumphrey's post yesterday on V7 forum who just experienced the same problem - same error msgs and codes. I responded to her post on v7 list that I was having the same problem, then thought it was significant enough to add that comment to my v8 list post.

Can't even get to that point, Virginia. Get error messages as soon as I either try File > Backup, or answer Yes when exiting if want to back up.

Have just started to get error codes when trying to back up any one of my three totally separate ver8 databases: OLE error code 0x80040154: Class not registered. 35 MENUOBJTMG.MBACKUPWIZARD [Abort, Retry, Ignore] If I select Ignore or Retry, I get: GOWIZARD is not an object. 41 MENUOBJTMG.MBACKUPWIZARD If I click X in upper right corner (instead of File > Exit), I get: Visual FoxPro error: Cannot Quit Visual FoxPro I have rebooted, then run optimize, validate file integrity, optimize. Still got same errors. Closed TMGv8, rebooted, turned off virus scanner, started TMG and tried File > Backup, but still got same errors. Saw on forum in response to same OLE Error Code to remove Wholly Genes PDF Writer v4 (Amyuni) driver, which I did, but did not install the PDF driver (don't need it; have Acrobat Pro). Still get same errors. Thanks! ~Carol

Have submitted problem to TMG support through Help menu, so hopefully will find solution. Just noticed where someone on Ver 7 forum is having the exact same problem.

I started getting the exact same errors when trying to back up any one of my three totally separate Ver8 databases. Have rebooted, then run optimize, validate file integrity, optimize. Still got same errors. Closed TMGv8, rebooted, turned off virus scanner, started TMG and tried File > Backup, but still got same errors. Submitted ticket through TMG Help menu, but waiting for reply. Hope someone has a fix, as I'm holding off doing any more editing until this gets resolved.

Thanks for making this available, Virginia. Opens up a whole new world for me!! ~Carol

On descendant box chart, is there any way to eliminate or modify the phrase "Is still living" when supressing details for living people? Thanks! ~Carol

I've done a pretty dumb thing, and would appreciate suggestions on how best to remedy the situation. Each time I add a US Census tag, I also add a Residence-In tag, with HOH as Principal, and all family members as witnesses. I fill in City/County/State as stated on the Census, then add in the Memo something like [lived] "in the house they rented at 999 Main Street." This works out fine and the sentence reads exactly as I want. Several months ago, I got the bright idea of adding [lived] "with their three sons, Sam (9), George (7) and Fred (3)" before "in the house they rented..." Well, that works fine for the HOH's narrative, but the "three sons" bit doesn't work in the witnesses' narratives. I know, I know...should have checked EVERYTHING out before proceeding but here I am, faced with going back to delete the "three sons" phrase from 100-200 records. (Obviously, it's different in every one: three sons, widowed mother, etc, etc.). I really don't want to change the memo sentence structure, as I like having the farm vs house plus street address there. Suggestions on how best to proceed? At the very least, I was hoping to be able to generate a list of all IDs with a Residence-Lived In tag, but I'm not seeing how to do that. Any help gratefully appreciated!! ~Carol

Outstanding suggestion! I knew I came to the right place!!! Many thanks to all who replied. ~Carol

Restored project to new computer (Win 7 - 64) from old (XP), but get error when trying to run Help > Check for Updates: "Associated Application Not Found - No application in c:\program files (x86)\the master genealogist v7 is associated with the update engine so it cannot check for updates. Please make sure that this software is installed properly." How do I correct this problem? All paths in Preferences > Current Project Options > Advanced are set to F:\Software\TMG\... if that makes any difference. Thanks in advance! ~Carol

Did a backup to DVD of several vcf charts I'm working on, and file listing of DVD from Win (XP) Explorer shows all files burned fine. The burn, including verification, was successful, and I can open an Excel file that was burned at the same time. However, when I File > Open in vcf and try to open a file from the DVD, I get "The parameter is incorrect" error message and can't open the file. I've tried opening several .vcf files from the DVD, all with the same results. Accessing the exact same files from my hard drive it was burned from opens fine. Before I burn another, does anyone have any ideas? Confucius sure knew what he was talking about when he said, "Always check disc before deleting files from hard drive." Thanks! ~Carol in Detroit

Virginia - Good thought about bringing a file back to the hard drive from DVD and trying to open it there. Yes, that does work. And naturally the Read Only attribute is set on the DVD. So apparently vcf doesn't like not being able to "converse" with the original file that was opened. Good to know. Therefore, I guess the answer is to not expect to open the file directly from the CD/DVD and doing a Save As to save changes. Good to know! Thanks for helping me think this one through. ~Carol

How do I specify that a name other than the Primary Name be used in the Repository Definition when linking to someone in the Data Set? I've entered the name variation I want in Name-Other, but the Primary Name is what appears in the Source footnotes. Thanks in advance! ~Carol in Detroit

I have been attaching a scan/exhibit to each Source, but am confused as to whether I should also be attaching that same exhibit in the Citation and/or the Tag Entry dialog boxes that use that Source as a reference. At this point, I am not using generic sources - each certificate is a separate individual source. Pros and cons for attaching the same exhibit in places other than to the actual source it was scanned from? Report implications? Thanks! ~Carol in Detroit (who's finally starting to get the hang of it!! )

Am trying to add the spouse's name to the sibling's box on an Ancestor Chart. On the Other tab, I have "Include Siblings" checked. On the Data Types tab, for "siblings of ancestors," I would like to add a line telling the spouse's name. For this particular project, I don't care whether the marriage date/place shows or not. I'm not quite clear on what all the Marr and Marriage tag types and groups are, but haven't stumbled on any that print the spouse's name. Any hints would be appreciated. Thanks! ~Carol in Detroit

If my .vcf chart is three sheets wide by five tall, the default page order is to print over, then move down and print the next row of three sheets. I'd like to use continuous banner paper and print all five pages down the first column, then all five in the second column, etc., thus only having to tape the three columns together, rather than each individual page. I have printer properties set to banner paper but don't see anywhere to change order. How do I change page order printing from over/down to down/over? Or is there a better way to accomplish this? Thanks! ~Carol in Detroit

Thanks for the suggestions. I tried a few quick things before heading off to the office, but don't think it's going to work. I created a new chart for testing that is three sheets long and two sheets wide. Printer is a new HP Business InkJet 1200 and drivers are totally up to date. I tried setting custom paper size in printer options to length of 33" (total height of chart) but the highest number the printer dialog box will accept is 14" (legal), even with banner paper, so guess that's out. There is an obscure buried (that I never noticed) printer option where I can select Down, then Right but it's only available if I print more than one sheet per page. So I selected three sheets per page, but it did no good because it never saw the page to be more than 14" tall. Played some with diagram measurements as you suggested, but it was still printing individual pages over, then across - even on banner paper. Fortunately this does not involve a deadline (for once!) - just playing around to see if it could be done. But, if you can do it, I should be able to also. So it's back to the drawing board for more testing - when time permits and pesky things like making a living, housework, etc. stop getting in the way. Will post a followup if I hit on a solution. ~Carol

I was afraid of that, but thanks for the reply, Robin. I had in mind something like what's available in MS Excel (File > Page Setup > Sheet tab: Page order down/over or over/down). With the common use of InkJet printers and banner paper, I would think this would be a standard feature. Even good ol' Generations had a "Tile left to right" on/off option. Maybe I'll go on record as suggesting it as a future added feature. Thanks, again! ~Carol