Jump to content

TerryD

Members
 View Profile  See their activity

  • Content count

    35

  • Joined

  • Last visited

Posts posted by TerryD

  1. Posted · Edited by TerryD · Report reply

    Thanks Jim,

     

    That has helped to clear up a problem that I have been seeing for months, it wasn't the end of the world, but not being able to see the "properties" of the exhibits was low level annoying.

     

    I had removed Windows Media Centre and reinstalling it appears to have done the trick (after trying the other suggestions).

     

    By the way I am running Windows 7, (for anyone else who has the problem) that just needs you to go into Control Panel, Programmes & Features and then in the left hand column select "Turn Windows features on or off", and under media you will find the programmes that need to be in place.

     

    Thanks again Jim, regards - Terry.

  2. Posted · Report reply

    Since moving to TMG 9 I have been experiencing a problem when looking at the properties of any photos from within the Exhibit log.

     

    If I select an image/exhibit and right mouse click and select PROPERTIES I get a "LOCATE MSDXM.OCX box pop up and the "Look in" is defaulting to The Master Genealogist v9.

     

    If I click on CANCEL I get a TMG error that says:

     

    OLE error code 0x80040154; Class not registered. 38

    FRMEXHIBIT.MSETPROPERTY

     

    and the option to abort, retry and ignore.

     

    Abort = drops back to the Exhibit log

    Retry = puts me back to Locate msdxm.ocx and then cycles back to abort, retry ignore

    Ignore = drops back to the exhibit log

     

    Any thoughts of how to fix this please. I waited for the release of 9.03 to see if installing that would do the trick. I have removed and reinstalled 9.01 previously.

     

    Thanks in advance - Terry

     

  5. Posted · Report reply

    Thanks Jim,

     

    All noted and understood.

     

    It comes down to your last sentence and I am trying to find out what file TMG reads (in maintenance/verify) to get its previously entered paths to use to reconnect missing exhibits. i.e. when it opens verify the paths previously entered are still there, are they stored in an .ini type file?

     

    Can that be edited manually so that I can add the complete exhibits folder structure which I can create with a utility that I have, i.e.

     

    TMG8exhibitscensuses1831

    TMG8exhibitscensuses1841

    TMG8exhibitscensuses1851

    TMG8exhibitscensuses1861

    TMG8exhibitscensuses1871

    TMG8exhibitscensuses1881

    TMG8exhibitscensuses1891

    etc.

     

    without having to select them one by one in VERIFY?

     

    Thanks again - Terry

  6. Posted · Report reply

    Thanks for the reply Virginia,

     

    The exhibits are in the correct folders, as I had already moved those over manually, so my installation/restore mistake created a second (flat) copy in the exhibits folder.

     

    I ran verify in the maintenance option deleted G:tmg8exhibits from the paths to check in and then manually added a couple of the correct folders and that reattached the first of the files. What I would like to do is mass add those folders to whatever file TMG refers to for the alternative paths so that I can add folders en masse, and reconnect the exhibits.

     

    Thanks again - Terry

  7. Posted · Report reply

    Good morning.

     

    I have a new PC and recently reinstalled TMG 8.04 and copied a backup over to the new PC and it looked fine.

     

    When I ran the verify utility, I was (pleasantly) surprised that the number of missing images had dropped to seven, it had been a lot more than that previously. I ran TMG Utitilies and that pointed out which ones I had to do someting about and when browsing the folders with file explorer, I noticed that I had a lot (over a thousand) exhibits in the TMG8\exhibits root folder and this is not where they were originally placed, e.g. they should be in various "TMG8\exhibits\familyX" type folders so I guess at some stage (probably on the previous PC) I have missed the setting where I should not have allowed TMG8 to set the path to the root.

     

    So my question is, I need to restablish the links back to the proper paths and I know that I can do this in the VERIFY utility within TMG, however to add each folder individually is going to be tedious. Is it possible to edit the file that VERIFY looks to so that I can add all the folders in as I have a utility that will create a text file with the folder structure and importing that will save time. I say this presuming that the VERIFY command does not accept wildcards and does not search subfolders?

     

    Thanks in advance - Terry

  8. Posted · Report reply

    Thanks Jim, the custom flag is an option that I hadn't thought of, and I will use it when I want something that is semi temporary. My idea is simply to use the focus group to set up the filter.

     

    Maybe I am doing things the wrong way around, but the ease/flexibility of setting up a focus group and being able to add and delete individuals without the more structured filter query would allow me to compare say four John Smiths and their families to see if there are similarities that links them, especially if you pen two copies of TMG at the same time. A basic example, but I think that it would be easier to set up in Focus than in the Filter? If I have missed a trick then please let me know, that is one of the reasons I enjoy using TMG, people are always using it in a diffferent way and many of the tips are so useful.

     

    Regards - Terry

     

    The change focus is useful but it would be good to be able to use it as the template for a filter.

    I can't imaging how that would be useful but it's simple to do.

     

    Create a custom flag.

     

    Use the secondary output of the List of People report to set the flag for the individuals in the Focus Group. The subject of the report would be the focus group.

     

    Filter the Picklist or Project Explorer or a report based on the flag.

  10. Posted · Report reply

    Thanks for that one Terry, I hadn't played with those settings (yet). Most useful. I must find time to ferret around in the "second pages of the settings/options". Maybe a "You might not have found this" topic?

     

    The actual question that I was searching for before coming across this was, can a Focus group results be used to a filter for the project that you are working on?

     

    Thanks - (another) Terry

  11. Posted · Report reply

    Good points.

     

    Humberside is an interesting one as it appeared and then disappeared to be replaced by what was there before (more or less).

     

    Middlesex and London are a bit different I would say. If you take the Square Mile as the only bit of London that is London we could have problems.

     

    I am more than happy to stick with whatever it was at the time (and do) but I have 23 Acacia Avenue, Middlesex and a "different" address as 23 Acacia Avenue, "Greater London".

     

    I am not losing sleep over it, I just wanted to hear from others which is the best way to tackle this so I don't have to backtrack later.

     

    Thanks again for the reply.

     

    Regards - Terry

  12. Posted · Report reply

    Thanks both, that is very useful. I am slightly surprised that nobody has asked for this before, it has been bugging me for a while as I get lots of Williams, Johns, and Georges marrying Marys, Elizabeths and Anns.

     

    However, the filtered report doesn't show either the person # or the Principle 2, so I want to change the output of this filtered report without altering the basic settings for other "List of events" reports, can this be done?

     

    i.e. Does "Save settings" on the "Report definition screen - list of events" screen save to the default for the report or to a filtered group version? If the former, then do I add a "configuration name" based on List of Events?

     

    Thanks again - Terry

  15. Posted · Report reply

    Thanks Terry.

     

    That is what I have done and tend to leave the same Chapman code in place to link them together i.e. ignore county and use the Chapman field (replaces Temple) and then Shropshire and Salop (two names for the same county) both are SAL, likewise the more obvious Devon and Devonshire with DEV.

     

    Middlesex itself is an interesting case as it surrounded the City of London (the square mile) from the SW to the East. Then Greater London appeared and we have London Borough of xxxxxx. Middlesex disappeared... except that our main cricket club is the MCC (Middlesex cricket club) and it is oddly a postal county without having a proper boundary. That isn't technically correct, but people still know Twickenham as being in Middlesex and address mail that way.

     

    By the way, that is a big generalisation so anyone who wants to disagree, feel free to do so, I only used it to make the point that our Capital City has changed radically from the old format to the new.

     

    Thanks again Terry.

     

    Regards - another Terry

     

    Terry,

     

    I'm not familiar with the situation in Middlesex/Greater London, but I've encountered lots of places that have changed names, become part of a different county (some more than once) or different state, or merged into another entity. I always report the place as it was at the time. If I figure it's important to the story I sometimes add an explanation in the Memo of the event Tag. Something like "later known as..." or "later part of..."

  18. Posted · Report reply

    Is there a way to search and replace in an Occupation tag memo in the same way as you can with Place tags in the master list?

     

    For ages I have been putting "a" and "an" in front of the memo, "a great fellow" and "an awful driver". I have bitten the bullet and changed the sentence construction and added the "a" in there and will amend the sentences requiring "an".

     

    Is there a way to go through my erroneous ways and remove the "a"s and "an"s in the memo fields en masse?

     

    Thanks in advance - Terry

  19. Posted · Edited by TerryD · Report reply

    I have had a quick search and not found a previous topic on this, but if there is, please point me at it.

     

    If I enter 10 Acacia Avenue, Anyhwere as my first line of an address it sorts next to 10 Cedar Drive, Somewhere. If I enter 9 Acacia Avenue as an address, it could prompt me (using f2) at 9 Cedar Drive which does not alert me that something has already occured in Acacia Avenue.

     

    Is it possible to sort the f2 lookup with numerals being ignored, or as somebody kindly suggested I could put the number in a prefield. I don't want to go through all of the records suffixing the number, Acacia Avenue 10 doesn't llok/sound correct.

     

    Thanks in advance - Terry

  20. Posted · Edited by TerryD · Report reply

    How do other people handle the transition from Middlesex to the current counties, which of course to a large part are now Greater London? I have lots of Middlesex entries that when I am tracking a family who stayed in one area have "moved" to the London Boroughs that replaced the famous County of Middesex. Do you just repeat the same address and add Greater London?

     

    Also I use Chapman codes and I am unsure what the code for Greater London is (or how it should be handled)?

     

    Has anybody else faced and succesfully concluded what should be done?

     

    Thanks in advance - Terry

  21. Posted · Report reply

    I may have found a partial answer.

     

    I have my TMG Exhibits folder in a Win7 Library folder. If I manouvere to the exhibits folder using Windows Explorer (i.e. not using the Library shortcut) it (Windows Explorer) doesn't crash quite so much.

     

    Delete TMG Exhibits Library folder and recreate. So far a lot more stable, but still has crashed twice, but not every time now so at least it is workable.

     

    Regards - Terry

     

    Morning all.

     

    I think that this may co-incide with a windows update last week, but now when I go to add an image I get as far as changing subdirectory to my exhibits folder and windows throws an error and closes TMG (7) down. If I don't go to use windows explorer all appears to be stable.

     

    Has anyone else started to experience this? I have rebooted and run maintenance on the files, but it doesn't appear to help. I might try in safe mode if noone else is experiencing the same problem.

     

    Problem signature:

     

    Problem Event Name: APPCRASH

     

    Application Name: tmg7.exe

     

    Application Version: 7.4.0.0

     

    Application Timestamp: 436c0d5a

     

    Fault Module Name: StackHash_a27d

     

    Fault Module Version: 6.1.7600.16385

     

    Fault Module Timestamp: 4a5bdadb

     

    Exception Code: c0000374

     

    Exception Offset: 000c283b

     

    OS Version: 6.1.7600.2.0.0.256.1

     

    Locale ID: 2057

     

    Additional Information 1: a27d

     

    Additional Information 2: a27d8dba21f3d4ab4cefd7b89e558422

     

    Additional Information 3: bf63

     

    Additional Information 4: bf63cb9d03aeeecc66fc84c3cd126529

     

  22. Posted · Report reply

    Morning all.

     

    I think that this may co-incide with a windows update last week, but now when I go to add an image I get as far as changing subdirectory to my exhibits folder and windows throws an error and closes TMG (7) down. If I don't go to use windows explorer all appears to be stable.

     

    Has anyone else started to experience this? I have rebooted and run maintenance on the files, but it doesn't appear to help. I might try in safe mode if noone else is experiencing the same problem.

     

    Problem signature:

     

    Problem Event Name: APPCRASH

     

    Application Name: tmg7.exe

     

    Application Version: 7.4.0.0

     

    Application Timestamp: 436c0d5a

     

    Fault Module Name: StackHash_a27d

     

    Fault Module Version: 6.1.7600.16385

     

    Fault Module Timestamp: 4a5bdadb

     

    Exception Code: c0000374

     

    Exception Offset: 000c283b

     

    OS Version: 6.1.7600.2.0.0.256.1

     

    Locale ID: 2057

     

    Additional Information 1: a27d

     

    Additional Information 2: a27d8dba21f3d4ab4cefd7b89e558422

     

    Additional Information 3: bf63

     

    Additional Information 4: bf63cb9d03aeeecc66fc84c3cd126529

     

  23. Posted · Report reply

    Thanks John.

     

    Yes I found the same (or very similar when it came to symptoms) problem in Adobe PhotoShop Essentials under Vista. I upgraded to Win 7 and the PSE problem went away, so maybe they aren't the same problem.

     

    I don't mind reg editing. If you want to email the details I will send you over my email address in a PM.

     

    Thanks again - Terry

     

    TerryD,

     

    TMGU has a problem on some PCs where you can't use the "select a folder" dialog window. There is no fix right now, but I expect to change TMGU in the future to allow the user to copy/paste the path. There is a Windows component that fails under a specific set of circumstances and I haven't been able to work around it. If you can't set the folder, then you can't use the feature. The only way around it would be to edit the registry. Unless you are very comfortable with technical system management tasks, I don't advise that.

×