Jump to content

okrick

Members
  • Content count

    26
  • Joined

  • Last visited

Posts posted by okrick


  1. What happened to the Age tag in the Customize Other Info window? It seems to have been replaced by something called "Selecte". Enabling Selecte doesn't provide any values.

     

    I have English (U.S.) selected as my language. I looked up Age in English (U.S.), English (U.K.), and English2 -- there was no substitute entered for any of these.

     

    I uninstalled and reinstalled TMG and the problem persists. The Age tag works correctly in the Sample Project. Therefore the problem must be in my working project.

     

    I've Optimized, Validated File Integrity, and Optimized several times.


  2. Michael,

     

    I ran a List of Events report with the following filter to find all 250 or so of my errors:

    CODE

    Tag Type... | Label | = Equals | MARRIAGE | AND

    ( Principal1.. | Primary marker | On | | AND

    Principal2.. | Primary marker | Off | | ) OR

    ( Principal1.. | Primary marker | Off | | AND

    Principal2.. | Primary marker | On | | ) END

     

    I have no idea how these crept into my file but I'll try to watch for it when adding folks from now on. Most but not all of the non-primary marriage tags were on Principle 2. I usually add marriages by alt-a then o (Add Spouse menu item) but maybe a third result from the prompt after adding both parents to a child.

     

    Good point about VFI. I can't imagine why someone might want a marriage tag primary for one partner but not the other but perhaps someone could enlighten me. Perhaps John Cardinal will pick it up in the utility.

     

    Thanks,

     

    Rick


  3. Please add a check to Validate File Integrity to make a marriage tag primary.

     

    I noticed some wierd results when testing some genealogy software for techsupport alerts. One of the spouses would not have a marriage link to the other, e.g. the wife would have a marriage to the husband but the husband did not have a marriage link to the wife.

     

    This was due to a couple of hundred instances in my database where one spouse had the marriage tag as primary but not the other. There was about a dozen where neither spouse had the marriage as primary. I'm positive I didn't add them that way. In fact the only reason I ever switched one marriage tag as primary for another was for engagements or the like, I'd make the marriage primary if it wasn't already.

     

    Thanks,

     

    Rick


  4. Personally I'd like to see the tab key function finally fixed properly on all screens. I know it's a small thing but the lack of attention to detail feels unprofessional.

     

    For example the Tag Entry screen opens with date highlighted. Pressing the tab key proceeds through the fields nearly as one might expect until the "Cancel" button is highlighted. The next tab key press does not go to the Help button. Instead it goes to the "Search for Digital Books" button. The next tab key press goes from the "Search Digital Books" to the Help button instead of "Look up this place on the web"

     

    The Master Source List goes Add, Edit, Delete, then jumps to Close, Help then jumps back to Search, Search Again, Copy, Renumber, then skips Merge to land on Cite Globally, Import, Export, then backtracks to Merge, then skips ahead to Less.


  5. When TMG 7.04 checks for updates on my Vista Home Professional 64 bit I get an "Associated Application Not Found" error message.

     

    Keystrokes:

    Alt-h = Help menu

    Up 3 times = Check for an Update

    Enter

     

    Associated Application Not Found

    No application in c:\program files (x86)\the master genealogist v7 is associated with the update engine so it cannot check for updates. Please make sure [sic] that this software is installed properly.

     

     

     

     


  6. Jim,

     

    Yes pressing the tab key works. I've also found that pressing the Next arrow works as well.

     

    I still feel that the way the filter works is obtuse--not intuitive at all. Nor does it work the way other filters in TMG work. For example, the [F2] people and place search works as you type.

     

    Thanks for your prompt response,

     

    Rick


  7. How is the Exhibit Log Filter supposed to work? I want to locate where a specific exhibit file is attached.

     

    I'm taking the following steps:

    1. Menu-->Tools-->Exhibit Log

    2. Sort--None

    3. Focus--All Exhibits

    4. Type--All Types

    5. Filter--1865 [the value I want to find]

    6. Nothing Happens

    7. I press Enter

    8. The filter works but I also get the Select files for new exhibit, e.g. same as if I had clicked on the Add button. The Add button is the highlighted button when the window is opened. I suppose that if Delete had been highlighted then the filtered file would have been deleted.

     

    What I expected was that either the filter worked as I typed in the filter value or that the filter only would apply when I pressed Enter after typing. Or a search/filter button to initiate the filter might help.


  8. This is almost trivial but it annoys me. When I click on one of the source previews and click Ctrl-A to select all of the footnote (or whatever) then Ctrl-C to copy, nothing is copied to the windows clipboard. In other words, if I then go to Notepad and Ctrl-V to paste nothing happens.

     

    However if I manually shade the entire preview without using Ctrl-A , then ctrl-C will copy the text and Ctrl-V will paste it in Notepad.

     

    I can duplicate this behavior every time in all of the source preview screens and with the sample database.

     

    Thanks,

     

    Rick


  9. Is it just a coincidence that if you take 2583 (your number of sources) and remove the 3 from the end and put it in front you have 3258 as mentioned in the error message? Hmmmmm......

     

    I'm not well versed in TMG but that seems a bit strange to me.

     

     

     

    Roy,

     

     

     

    The 3258 was from the error message in the original post and probably has nothing to do with the number of sources. I have less than half that many sources.

     

     

     

    Rick


  10. When "Link Project Explorer to Other Windows" is selected the Picklist behaves oddly. It searches normally as I type but when I quit typing it continues processing my keystrokes then reverts back to the person I was on when opening the picklist. I've observed this behavior on both the simple and expanded picklists.

     

     

    I've dealt with this for a long time now (several minor and at least one major version) and know how to fool TMG into behaving otherwise. I wait a couple of beats after the the picklist stops searching then type the final character of the name.

     

    I've never seen this mentioned in the forum so I'm wondering if anyone else has noticed this behavior.

     

    Regards,


  11. I'm getting a "1234Subscript is outside defined range. 3258 GO_ASOUR" error when attempting to export to a GEDCOM file.

     

    I've validated and optimized the file. I get the same error when using the default GEDCOM export but not the bare bones one.

     

    I suspect that the corruption issue has crept back into my database.

     

    Thanks,

     

     


  12. Since you last ran TMG successfully have you run an anti-virus or anti-spyware program which might have quarantined a necessary TMG file? There was a recent report of a possible problem with Spyware Detector 5 in this regard.

     

    Virginia

     

    No I haven't. I checked the log files for both the anti-spy and anti-virus.

     

    I reinstalled TMG and the problem went away.

     

    Rick


  13. The source types on merges and imports defaults to Miles instead of Lackey.

     

    My Current Project Options are set to Custom Source Types based on Lackey. I started with Lackey and switched to custom. My New Project Defaults are set to Lackey.

     

    Importing any gedcom file to the current project and the new data set gets the full set of Miles Source Types. It should be either Lackey or my custom Source Types.

     

    Importing any gedcom file to a new project correctly gets the Lackey Source Types. I thought great--no cleanup. However, when I merge the new project to the current project the new data set Source Types explode into the Miles Source Types.

     

    Please report this behavior to the developers.

     

    Thanks,

     

    Rick

     


  14. How can I delete many exhibits at one time from the exhibit log? I ran across an issue where I had over 600 external exhibits linked to a source. This source has no connection to the exhibits and I have no idea how they got attached to this particular source.

     

    Anyway, it seems that I must select them individually one at a time by mouse, click delete, and then click Yes on the are you sure screen. I can't even suppress the are you sure screen for the exhibit log in the file preferences. Is there some way I can select most of the sources and delete them at once?


  15. http://tinyurl.com/2sygxj

    The surnames Toensing, Tonsing, Pittenger, Farmer, Holsapple, Gosser, Bernard, Martin, Brown, Walker, Brashear, Young, Pittinger, Nicholas, Johnson, Looney, Woody, Smith, Bowen, Böhning, Preston, Jones, Bogart, Thompson, Challiss, Williams, Raney account for 1/3 of the people listed.

     

    Includes lists of people buried in the Farmer public and family cemeteries in Tarrant County, Texas and a list of people with Tonsing and related surnames from the Cleveland, Ohio City Directories.

×