DuaneSmith 0 Report post Posted November 19, 2010 I just tried to do a backup of one of my projects and got the following error message: OLE error code 0x8004054 class not registered 35 MENUOBJTMG.MBACKUPWIZARD. Backup working correctly the last time I backed up. What do I need to do correct this situation? Thanks in Advance. Share this post Link to post Share on other sites
Jim Byram 0 Report post Posted November 19, 2010 I'm assuming that you are running v7.04. Reinstall over the current installation to refresh things. Use the exact same settings as your previous install and use the current installer (rather than using an older installer and updating). The installer can be found here if you don't have it... http://www.whollygenes.com/files/tmg7setup.exe This procedure will re-register the control that is giving the problem. Share this post Link to post Share on other sites
DuaneSmith 0 Report post Posted November 20, 2010 I'm assuming that you are running v7.04. Reinstall over the current installation to refresh things. Use the exact same settings as your previous install and use the current installer (rather than using an older installer and updating). The installer can be found here if you don't have it... http://www.whollygenes.com/files/tmg7setup.exe This procedure will re-register the control that is giving the problem. That worked. Thanks. Share this post Link to post Share on other sites