tmg-caster 0 Report post Posted January 26, 2015 Ole error code 0x800a017d: Unknown COM status code 22 FRMNAMSEL.SHOW This is just one of the errors I keep getting with TMG v 9 received when I click on the binoculars icon to search. When I open TMG I can search one time and then I get this error. Another problem; I try to print out a Descendant Box Chart and I get these errors when I hit ignore button: Operator/operand type mismatch. 8 FRMCHART5.CNTFILTERFLAG1.MSET CONTROLS Array dimensions are invalid. 5 FRM/CHART5.CNTFILTERFLAG1.MUPDTEVALUES Not a numeric expression. 22 FRM/CHART5.CNTFILTREFLAG1.MSETCONTROLS Operator/operand type mismatch 23 FRMCHART5.CNTFILTERFLAG1.MSETCONTROLS Nesting error 25 FTMCHART5CNTFILTERFLAG1.MSETCONTROLS ditto 27 ditto then the window to create the report pops up and I get Error Opening Database D:\ folder/file Error number 1 Error Message =Could not open D:\ folder/file /JC$.DBF I love my TMG and I don't want to lose it however, I am wasting hours of time just trying to get some information into and out it. I will appreciate any help I can get These problems never occurred until I moved to Windows 8 now 8.1 16gb ram 64 bit OS x64-based processor AMD A6-6310 APU with AMD Radeon R4 graphics 1.8 GHz Thanks Patricia Share this post Link to post Share on other sites
Jim Byram 0 Report post Posted January 26, 2015 Run the installer and select [Repair]. If you are running v9.05 and don't have the installer, it can be downloaded here... http://www.whollygenes.com/forums201/index.php?/topic/15915-tmg9-final-installers/ Share this post Link to post Share on other sites
tmg-caster 0 Report post Posted January 27, 2015 Thanks for the repair tip. It solved the search function. However still receiving the errors when I try to create a descendent box chart. Any other suggestions? Share this post Link to post Share on other sites
RobinL 0 Report post Posted January 27, 2015 The message FRMCHART5.CNTFILTERFLAG1.MSET CONTROLS you are trying create a chart based on person with FLAG1 value = <somevalue> This suggests to me that your first custom flag has some incorrect values or a bad definition or that the focus person does not have that particular value set. RobinL Share this post Link to post Share on other sites
tmg-caster 0 Report post Posted January 27, 2015 That is really weird because the only flags I have are the default ones. I haven't had any time to add any custom flags. The only other factor is that I have several datasets that have been imported from paf and or gedcom files. I never have used exhibits but I keep getting the message that the exhibits are missing. I just figure that the exhibits belong to the imported files. I just ran the file integrity tool and no errors are found. Any other ideas? Thanks for your help. Share this post Link to post Share on other sites
Virginia Blakelock 0 Report post Posted January 27, 2015 Try resetting the report definition for the Descendant Box Chart - using the Reset Defaults button under the configuration name on the report definition screen. Run that default box chart and see if you get an error message. Virginia Share this post Link to post Share on other sites
tmg-caster 0 Report post Posted January 28, 2015 Virginia, the error appears immediately, I don't have the option of resetting the defaults for the Descendant Box Chart report. Ancestor Box Chart does open the design window - re-setting the defaults does not help I get Error opening Data base d:\ "location" Error Number = 1 Error message = could not open d:\ "location" /JC$.dbf I searched the right directory and the JC$.dbf file is not there. Patricia Share this post Link to post Share on other sites
Jim Byram 0 Report post Posted January 29, 2015 Check your Report_output path in Preferences. File / Preferences / Current Project Options / Advanced / Report_output Clicking the button at the right end of the field will select the default path. Share this post Link to post Share on other sites
tmg-caster 0 Report post Posted January 29, 2015 That fixed it I think. At least I am seeing a chart now and no errors. I will print out some of the charts in the next couple of days. Thanks and gratitude to everyone that offered suggestion and for your patience. This is the first thing that has gone right all day. Patricia Share this post Link to post Share on other sites
SteveKyner 0 Report post Posted March 1, 2015 I'll jump in here because I don't see a way to start a new thread. Trying to print any report, either from screen view or direct, I get OLE error code 0x80040154 Class not recognized Unknown member ROPROTECTIONMAN. Reports will go to the screen but not the printer and when I persist in trying to print, I am dumped to the DOS directory. Any help greatly appreciated. I am suspicious of a recent Windows security upgrade as those always cause mayhem in my registry.(Win 7) Steve Kyner Share this post Link to post Share on other sites
Jim Byram 0 Report post Posted March 1, 2015 Run the installer and select [Repair]. If that doesn't work, reset the report configuration. Share this post Link to post Share on other sites
Michael Hannah 0 Report post Posted March 1, 2015 When you run the installer, be sure to right-click on the installer file and Run as Administrator. Share this post Link to post Share on other sites
SteveKyner 0 Report post Posted March 2, 2015 Thanks, Jim and Michael. I am up and running (printing) again. Steve Kyner Share this post Link to post Share on other sites
Michael Hannah 0 Report post Posted March 2, 2015 Great. Glad to help. Share this post Link to post Share on other sites
