martlets 0 Report post Posted October 22, 2005 (edited) After some years of successful use of TMG, I had the need to print a blank Pedigree Report. This was successful, however I am now unable to print non-blank reports. I un-checked the "Blank Report" box, but whichever person in my project I select, the report shows as "Chart of an unknown person" and all data is missing. Suggestions as to how to fix this would be most welcome. Edited October 22, 2005 by martlets Share this post Link to post Share on other sites
Virginia Blakelock 0 Report post Posted October 22, 2005 After some years of successful use of TMG, I had the need to print a blank Pedigree Report. This was successful, however I am now unable to print non-blank reports. I un-checked the "Blank Report" box, but whichever person in my project I select, the report shows as "Chart of an unknown person" and all data is missing. Suggestions as to how to fix this would be most welcome. In the Pedigree report definition screen, check the surety levels on the General tab in Options. Tick both 'No Threshold' and 'Include blank surety'. If that does not fix the problem, try resetting the report configuration, using the Delete button just under the Configuration name. Virginia Share this post Link to post Share on other sites
martlets 0 Report post Posted October 23, 2005 Virginia - Thank you so much - problem fixed! It's so long since I used that feature that I'd forgotten how to get back to the standard version. Share this post Link to post Share on other sites